Check_MK-Exchange

A check_mk agent for HP 3Par over WSAPI

Infoblox package from Exchange made by Marco Tizzoni nd Emanuele Scaicca, Michiel van Pouderoijen: In latest firmware releases of Infoblox it can occur that there are service values returned in the SNMP values that are not in use and also have no description. Version 1.2 fails on these.

Angepasste Event Console für die Version 1.4.0

Active Check for Radius Server. Tested with Windows Domain Controller acting as server.

APC InRow Gen2 Alarms

APC InRow Gen2 RD

Check APC UPS via "apcaccess status"

Check APC UPS via "apcaccess status"

extension for external Sensor AP9335TH

SNMP based check (alarm messages) for AppearTV devices.

check for available updates via apt-get on Debian and this Derivates. Changelog: 2.9.0 21.09.2017 works with cmk version 1.4 2.8.1 23.01.2017 Fix mix kernel Packages Debian 7/8 thx to proximity.de 2.8.0 23.11.2016 Integration Agent Bakery 2.7.0 02.05.2016 activate Patch from dasmarci

Checks for Areca Raid HBAs

AS400 Checks based on https://github.com/kalugen/check_mk-as400_checks

Checks the available entropy

AVTech Room Alert 3E temperature monitor

Plugin and check for Backup Exec Job status

BGP Peer State Check

Varios BlackBerry Enterprise Server checks

Temperature Monitoring for Bladecenters. Uses Sensors in the Management Module and the Mediatray. Only Tested with IBM Bladecenter-H. Update for CMK Version newer than 2015.01.07

This check uses SNMP to monitor the status of each Disk on an Bluecoat Device which provides access to the deviceDiskMIB (.1.3.6.1.4.1.3417.2.2.1.1.1.1)

Brocade SNMP checks

WATO plugin for check_imap

Plugin to monitor IBM Informix databases

Monitors daemontools (svscan) services status

Adaptec Controllers Local Check

Check for Dell Storage "Compellent" SC Series

A collection of Check_MK Checks for F5 BigIP Load Balancers

Check for individual exchange mailbox sizes

Add new check, check manual and multisite plugins for linux broken paths. It is to monitor the whole sum of paths for LUNs provided insteat of monitor each single LUN. This check comes along with a version of the multipath check exported from 1.5.0p9. If you want to keep the multipath check for updates link the original from ~/share/check_mk/checks/multipath to the corresponding local directory. The check is not backward compatible to versions below 1.5.0 cause of changes on multipath check and changed perfometer render options. Please use mkp version 1.0 for any Check_MK down to 2015.10.06.

Check Gearman Server Status

A collection of Check_MK Checks for Infoblox Appliance

Check Inodes usage

Check Linux EDAC memory controller states for ECC errors

Fixed quote issue preventiing automatic inventory; ReWorked Netapp Checks, please use snmp_uptime for netapp Uptime

Mysql Status Check. Full configuration via Wato. Works as Subcheck for the normal check_mk mysql monitoring, so that plugin has to be set up first in order to make this check work.

Check health of the Solaris UFS LVM

Check health of Solaris 10 native multipathing

Check health of Solaris raidctl managed controllers

Search for packages whose support is limited, has already ended or will end earlier than the distribution’s end of life in Debian LTS.

monitor Check Point appliance soft RAID

group of checks to monitor checkpoint firewalls

Monitors status of Check Point Identity Awareness. Creates one check for the global IA status and one check for each AD Query (LDAP) domain.

PostgreSQL Database checks.

Monitor and graph the current power consumption of APC ATS and PDUs.

Several checks to monitor Qnap Storage Devices

Different checks for DELL N2000/N3000 series switches

SNMP based check for Palo Alto Sessions Counter

Checks for DFS State

Fortigate checks with a different oid

Checks for IBM Tape Library TS3200 via SNMP

Monitoring of Lightning Network Nodes (lnd) v.1.1 - lnd_network and lnd_balance checks to stale if wallet is locked

Checks for Mcafee Web Gateway

Checks for Overland Neo Series Tape Library

Check sensors for Poseidon devices

Checks for Puppet Agent

Checks for StorNext SANs, including XSans, using the cvadmin command.

This check uses the smsd status file to monitor the state of sms deamon.

Checks Solaris system health

Various checks to monitor the state of a synology NAS.

HP MSA Storage Unit checks.

check_mk check and WATO Rule for check_krb5 from http://exchange.nagios.org/directory/Plugins/Security/check_krb5/details

Ciena Corestream Checks

Returns the number of active Remote Access Sessions on Cisco ASA Devices.

monitor Cisco ASA fan sensors

monitor Cisco ASA power supplys

Monitors Cisco ASA Temperatur sensors

Monitors Cisco BGP Peers (CISCO-BGP4-MIB). - creates one service for each peer/address family (IPv4 and IPv6) - performance data include: peer uptime, prefixes accepted, advertised, denied, suppressed and withdrawn v0.2: added support for more then one address family per peer

Check_MK inventory extension which shows the neighbor devices via CDP protocol.

Cisco CPU Utilization Monitor

This check monitors Cisco Digital-Optical-Monitoring values using SNMP.

Cisco MLS QoS monitor the hardware queues of an Cisco switch, for example an C2960.

Cisco Module State Check

A collection of Cisco Nexus-specific checks: Fans, FRUs, memory, CPU

This check monitors the consumption of POE on Cisco devices.

CISCO number of pool IP free

Checks for device containing Cisco Remote Access MIB

Check Cisco spanning-tree for topology change.

Check Cisco Stackwise status.

Checks for Cisco VPN3000 device

Measuring the citrix license server.

Check for AAA sessions of Citrix Netscaler

Monitor UPS managed by apcupsd

Extension for monitoring Comet P8xxx temperature sensor using SNMP

EXtreme Networks Switches CPU

Misst Transfers, Dateien und Datenvolumen eines Cryptshare-Servers

Customized check and wato plugin for mssql_backup. It's now possible to set levels for all kinds of backup types

This check retrieves the monitor states of DataCore SANsymphony-V installations using SNMP.

Dell OMSA SNMP Checks

Shows some additional data of a DELL Powerconnect switch

Dell StorageCenter SNMP checks

Detect and print information if system is running under some virtualization technology

Detect Virtualization Technology

This check adds a test for misbalanced metadata chunks to the df check of a btrfs filesystem. Please refer to the github url for further information. Be aware that you have to patch the check_mk_agent in order to make this work!

df_inodes to check usage of inodes in Linux/UNIX filesystems

DFSR Backlog Check for Windows AD Environment

Monitor directory sizes

Disables the tag nowrap in WATO folder view Set's the max height for tag cell and wraps to max 3 lines. Ships the original CSS file and includes them.

Check & agent plugin to monitor Distribution Release versions

Contains plugins and checks to monitor Docker Service, Containers and Images. Prerequisite: pip install docker (Version 2.5.1 or newer) 1.2.1: The package is now compatible with CMK 1.4.0, too. 1.2.2: The plugin can now handle images without RepoTags (which were used as item name before) 1.2.3: Now compatible with CRE versions & more fault tolerant, esp. on heavily loaded machines 1.2.4: Bugfixes

Check_MK plugin for checking LUN status on old DPT / Adaptec 2xxx Raid controllers

Description: check_mk EMC Isilon Version: 0.2d_mk Usage: - check_mk agent and plugin with WATO rules and cee metric graphs - see agent for installation instructions Features: - CPU load, filesystem, disk status, temperature, memory and uptime of every node - Cluster status, firmware level, capacity and NTP info - Performance statistics incl. IOps, net and disk throughput - Quota usage incl. summary, configurable thresholds - SyncIQ delay, configurable thresholds Update: - redeploy agent when updating from any earlier version Changelog: 0.2.d - fixed a crash when a node is in maintenance or reboot - added WATO option to ignore network packet errors - statistics CEE metrics now have friendly names - reworked memory CEE metrics graph

EMC PowerPath Plugin

EMC Unity Agent and Plugins - Tested with Unity 300, 400VL and 450F

EMC Unity Agent and Plugins - Tested with Unity 300, 400VL and 450F

EMC Unity Agent and Plugins - Tested with Unity 300, 400VL and 450F - !!! for cmk 1.5.0 package go to: https://www.github.com/ImTheLucKyOne/check_mk_emcunity/tree/cmk-1.5.0-compatibility/emcunity300 !!!

EMC Unity Agent and Plugins - Tested with Unity 300 and 450F - !!! for cmk 1.5.0 package go to: https://www.github.com/ImTheLucKyOne/check_mk_emcunity/tree/cmk-1.5.0-compatibility/emcunity300 !!!

Checks EMC VNXe-Storages. Installation and proper configuration of UEMCLI required. Checks actually only have basic functions. ToDo: - Proper declaration of states - Configuration per WATO - Collection of performance values, if possible

EnhanceIO cache status

SNMP based checks (fans, temperature) for the Ericsson/Tandberg RX8200 IRD.

SNMP based checks for the Ericsson Envivio 4Caster encoder.

Agent for ESP Easy

Counting established tcp connections.

SNMP based checks (framestatus, PSUs) for Evertz 7800 series framecontroller.

SNMP based checks for the Evertz IRDA7881 IRD.

Shows the size of a Mailbox Database and the count of mailboxes in there. The data is recieved from the plugin running on a Exchange 2010 mailbox database server. Corrected for Mailbox DBs with spaces in the name and Python Syntatic space "bug", including 64Bit Windows CMD "Sysnative" access.

Check_mk check for individual exchange mailbox sizes.

Monitoring Exim Mail Queue

Standard cmk Active Check check_dns uses nagios plugin check_dns in Version 2.2 which does not allow query types other than A. Nagios Plugin Collection 2.2.1 has extended this with parameter -q This check makes use of this.

In BIG-IP 11.2.0 and later, the F5-BIGIP-SYSTEM-MIB file contains the sysCmFailoverStatusId OID (1.3.6.1.4.1.3375.2.1.14.3.1) that can be queried through SNMP to determine the failover status of a BIG-IP system in a device group. see https://support.f5.com/kb/en-us/solutions/public/14000/300/sol14399.html

Monitor fail2ban jail status

Group of Checks for Fortigate Firewalls, CPU, Mem & Session Count

Fortigate IPSEC VPN Tunnel - checks single PH2 IPSec tunnels

Fortigate cehcks to monitor WTP Access Points

Agent for french ISP Free "Freebox revolution"

Check Fujitsu storage systems supporting the FJDARY-E100 MIB like the ETERNUS DX80 S2 (derived from the FJDARY-E60 checks).

This extension synchronizes information from GLPI.

Display hosts on map. Pick position using map. Find host on map using host icon.

Hardware Checks for Data Direct Storage

Checks m3u8 playlists and segments for availability.

HP-UX Kernel Tunables Usage

HPE Comware SNMP checks for CPU, RAM and temperatures.

Shows some information about the HP EVA

HP SmartArray Checks latest hpssacli outputs Array instead of array Support for /usr/sbin/ssacli

HP SmartArray Checks

Integrate Thruk PDF Reports into Check_MK

Generates and monitors Iperf3 based network checks

Check if previously assigned IPv4 addresses are still configured

Send notifications through IRC

Check ISC named/Bind9 Health

This plugin extends the original jolokia_metrics distributed with check_mk. It adds the functionality to include userdefined MBeans/Attributes to the monitoring.

A parse function to handle JSON in agent sections. If content cannot be decoded as JSON returns an empty dictionary.

A parse function to handle JSON in agent sections

A collection of Juniper checks: chassis, CPU, memory, processes, temperature, and the IVE (product specific)

Kemp LoadBalancer SNMP based checks

Monitor Memory of Kemptechnologies Loadmaster

Get date of last windows update.

extension to Maximilian Thoma's "cisco_inv_cdp" plugin (http://www.lanbugs.de/howtos/monitoring-check_mk/inventory/check_mk-inventory-cisco-cdp-neighbors-extension/) which makes it hopefully more general for Linux Hosts too.

Checks for Liebert Conditions

Checks for Liebert HIMOD air-condition

This check will report the number of available updates and security updates for RHEL/CentOS servers

The inventory extension read the LLDP MIB via SNMP and shows neighbor devices.

Monitor LMSensor sensors output

Lotus Notes Domino SNMP Monitoring

This check uses the lvsgsp binary to monitor the state of the LVS Loadbalancer VIP. It collect information of the actice and inactive connections from virtual LB Node to the real server. The params are changeable with WATO rule "LVS Connection levels".

Discovers and checks for LXC containers on Proxmox VE 4+ hosts and displays CPU and memory usage

SNMP based checks (fans, PSUs, system status) for the Lynx RCT5023g frame controller.

SNMP based checks (fans, temperature) for the Mayah C12 IP/ISDN audio codec.

This is an extension of the plugin found at http://git.mathias-kettner.de/git/?p=check_mk.git;a=tree;f=doc/treasures/memcached;hb=HEAD It adds autodetection (copied from apache_status) and agent bakery integration. Now reworked to support counters.

This is an extension of the plugin found at http://git.mathias-kettner.de/git/?p=check_mk.git;a=tree;f=doc/treasures/memcached;hb=HEAD It adds autodetection (copied from apache_status) and agent bakery integration. Now reworked to support counters.

Monitor MS Clustering * Resources * Nodes

Monitoring how many active/disconnected sessions you have on a server * With the verbose option you also can who is active of disconnected

# # Description: MikroTik Router Info # - BGP # - OSPF # - Fans # - Power # - Temperature # - Routerboard Info # # Maintainer: thomas.tretbar@managedhosting.de # # Version: 2.0 # # Created: 2018-10 # # Usage: - Datasource program for API access, configure via WATO # (enable API access on device) # - "pip install librouteros" on check_mk instance # - also use SNMP to get interface, CPU, Mem, fs ... # # Changelog: 2018-10-12 - initial release - thomas.tretbar@gmx.de # 2018-10-17 - 0.2 - thomas.tretbar@gmx.de #

SNMP based checks (card/PSU presence, system status) for the Miranda Densité frame controller.

Monitoring SAP ABAP

This check allows to monitor the presence of defined mountpoints

MTR ping/traceroute package

Multicast checks: IGMP querieres, MSDP peers, PIM peers

This Multiside Snapin manage the visibilty of Host and Services, only show hosts and services the user is a contact for, yes or no.

This is an expanded, "smart" mysql monitor. It supports inventory, will monitor a bunch of MySQL variables, and slave replication status (on the slave side)

MySQL slaves check

Nest Home Automation checks of thermostat

Returns the number and types of Consistency Points taken by a netapp per minute.

NetAPP Checks for CPU Usage, Fans, HDDs, Battery, Powersupply, and Uptime

Check Health of Netgear ReadyData Storage

SNMP based checks for the Netgear ReadyNAS.

A collection of netscaler environment healthy checks

Netscaler checks: vServer

Checks for Netscreen device

Linux agent plugin to collect network interface addresses and check plugin to check them against a list of RBLs

Collects NFS mount performance data on clients

Notification script for xmpp

Notificationscript to send Notifications via XMPP with full WATO integration.

Script to send notifications to a Pushbullet channel

Checks nullmailer queue size

Show info about Cluster, Alerts, Containers, HA, Hosts, DataProtection, Remote Tunnel, StoragePools & Virtual Machines.

This check monitors the buffer cache hit ratio in an ORACLE database instance.

oracle_dbvisit

oracle health

OSPF Neighborship State Check Th.L. 15-06-2018: changed item from neighbor id to neighbor address added events as perfdata (incl. metrics file) moved part of the output to long output

Shows tasks status from OTRS 5 Maint::Daemon::Summary

Extension for monitoring Papago 2TH ETH sensors using SNMP

Check status for each client existing in UrBackup. Each backuptype (filebackup and imagebackup) is listed as indepenent service for each machine. WATO configuration avaliable.

Check status of Proxmox VM (QEMU) client backups. Each VM guest is listed as indepenent service. WATO configuration avaliable.

Prueft die Queues von Mailcleaner(www.mailcleaner.org)

Lightweight Multisite-Plugin for performance graphs

Check Qemu/ KVM

Checks the size of the Qmail Queue

Basic rabbitmq checks with WATO

Raritan PDU SNMP Checks

Raritan PDU SNMP Checks

RDP Active Check WATO Template and Check_mk check -- This Check Requires check_x224 (from http://goo.gl/YTEKoq) in local/lib/nagios/plugins/

Remote Access Icon

Check for Rittal CMC PSM Units. Shows the actual Ampere size.

checks humidity on Rittal CMC TC sensor units

checks smoke detector sensor units on Rittal CMC TC

Monitors all sensors of an Rittal LCP. Temperature in/out, Blower Grade, Regulator, Water in/out, Waterflow

Show info about the Rubrik Backup Appliance

SAP HANA checks original version from Gerd Stolz

SNMP based checks for the Selenio MCP frame controller.

Sidebar Snapin to show acknowledged host/service problems by current user. Also shows current host/service downtimes system-wide. You can define what username format is used ("id", "alias", "firstname surname") in ~/local/share/check_mk/web/plugins/user_overview.py v.1.1 - adjustments to work with cmk 1.4.0, maybe you have to remove the old snapin from the sidebar and add the new one manually. Old package for cmk < 1.4.0 can be found on github. v.1.2 - fixed wrong view name, thanks to robert sander v.1.3 - fixed two bugs (see github issues), thanks to robert sander v.1.4 - now also works with nagios core

Monitor openldaps slapd Operation and Network statistics via monitoring DB and replication status.

SMART Temp check inclusive Performance Data, it is just the example check explained in the documentation about writing own checks

Adds a notification per SMS via sms77.de to your check_mk. Cheap SMS Monitoring!

This is a notification plugin to send pager messages (SMS) via ASPSMS.com. You need a paid account at their service and the userkey and api password for the configuration of this notification method.

Notification plugin to send text messages via ecall.ch You need an account with username and password and need to have the HTTP API unlocked by the service.

SMS Notifications with Skebby.it

You can define assignments between products and repository/catalog in SUSE SMT which this check monitors for its presence.

SNMP based checks for the Snell IQH series frame controller.

SNMP Check for System Uptime

monitoring changes of ENTITY-MIB entries

SonicWall Cpu, Mem, Connections, VPN checks

Special agent based on active check “check_bi_local” the mkp contains an adjusted view "api_all_aggr" that enables the needed search context for getting more than one aggregation v1.1: added acknowledgement tracking (like downtimes)

Customized jolokia agent with option to add check_mk agent output via wato rule. v.1.1 - added missing customized check agent_jolokia

Special Agent (Datasource) for Amazon RDS Postgres

Squid3 Health Check

Check helth of Squid Cache

SSH Active Check WATO Template and Check_mk check

Agent Plugin to check SSL certificates in specified directories Now with support to check signature algorithm Windows Plugin added

Agent Plugin to check SSL certificates in specified directories Now with support to check signature algorithm Windows Plugin added

This check monitors the status of ssl cert checks on ssllab.com. Changelog: - 1.4.5 fix inventory issue while JSON issues - 1.4.4 change urlopen error handling - 1.4.3 Rename check file - 1.4.2 Fix check manpage - 1.4.1 delete modul calls from check - 1.4.0 changes for cmk version 1.4 - 1.3.1 improve error handling.

Checks a Linux logical volume management storage system for the capacity of its volume groups and physical volumes

Shows changes in the amount of active SAs on a strongSwan deployment.

Multisite plugin to sync check_multi conf dir. The dir must create on all needed sites befor by hand. Changelog: 12.01.2017 change to support cmk version 1.4 25.09.2018 change to support cmk version 1.5

Multisite plugin to sync check_multi conf dir

Measuring the terminal server sessions on win2003/8

Replacement for dell_om_disks with multiple controller support

Monitoring message counters

Please add a description here

Please add a description here

Rocket.Chat Notifications

Check the time difference since last run of e.g. cronjobs, programs or scripts and now

Custom SNMP Based Tridium Checks.

Check Ubuntu patch status.

Checks for UPS supporting UPS-MIB

Checks virtual hosts in USP SES appliance via SNMP

Veeam Agent Plugin v2, supporting retried/retrying backup sessions

Veritas Cluster Server Plugin

Checks on a windows 2003/2008 server via the VMwareToolboxCmd.exe ( check the default installation place: %ProgramFiles%\VMware\VMware Tools\VMwareToolboxCmd.exe) parameters like ballooning, swapping, cpu/mem reservations/limits, timesync and upgrade status).

Check MongoDB WATO Plugin for check_mongodb.py from https://github.com/mzupan/nagios-plugin-mongodb

Link icon to connect to the web based remote access service of hosts.

WebInject WATO & Checkplugin

Checks if Windows Defender is running and if its Up to Date * Windows Server 2016 only

Check Windows Firewall State

Simple Check to monitor Windows Firewall Profile-State; Working with Window Server 2008 and newer. Added Bakery

Lokales Plugin zur Überwachung von MultiPfad IO-Verbindungen

Simple check to see which version of Windows your running on the host.

Windows-Agent Plugin for volume-check - min. platform win2008 or newer or vista and newer

Get age and state of last sync on WSUS Server v.1.1 - added missing check plugin

check memory and hits of the php opcache Module XCache.

Check plugin for Xen hosts that monitors VM status and used memory

Checks for updates on RPM-based distributions via yum.

This plugin extends the zypper check shipped with check_mk. It lets you configure thresholds for updates (<=SLES11.4 recommended and security; >=SLES12.1 important and critical), the maximum duration security updates can be available until a warning or critical state is raised and the status a packagelock should raise.

Collection of Zyxel WLC checks zyxel_capwap: monitors state of Zyxel WLCs, Perfdata: online/offline/unmanged APs, clients zyxel_foreign_aps: monitors state of foreign APs, Perfdata: unclassified/rogue/friendly APs zyxel_walncontrolleraptable: one check for each AP, Perfdata: tx/rx frames, clients zyxel_cpu: monitors cpu usage, Perfdata: cpu usage zyxel_mem: monitors memory usage, Perfdata: mem usage zyxel_flash: monitors flash usage, Perfdata: flash usage snmp_zyxel_common: inventory of product, serial and model snmp_info: updated to check for already set product in inventory Tested with NXC2500 and GS1900-8HP (inventory only).